logo

λεπτομέρειες για τα προϊόντα

Created with Pixso. Σπίτι Created with Pixso. προϊόντα Created with Pixso.
Βασισμένες στο νερό βιομηχανικές ρητίνες επιστρώματος
Created with Pixso.

Alkali-Resistant Acrylic Emulsion for Sealing Primers WL-J400

Alkali-Resistant Acrylic Emulsion for Sealing Primers WL-J400

Ονομασία μάρκας: WeiLi
Αριθμός μοντέλου: WL-J400
Μούβ: 5000 KGS
τιμή: Negotiate
Όροι πληρωμής: T/T
Ικανότητα εφοδιασμού: 500 ΤΟΝΟΙ
Λεπτομέρειες
Τόπος καταγωγής:
Κίνα
Πιστοποίηση:
ISO9001
Πλεονέκτημα:
εξαιρετικά υψηλή θερμοκρασία μετάπτωσης γυαλιού
Χρήση:
επίστρωση λατέξ εξωτερικού τοίχου
Στερεό περιεχόμενο:
48,0 – 50,0 %
Εκτέλεση:
εξαιρετική αντοχή στο νερό, αντοχή στα αλκάλια και ιδιότητες κατά της ανθοφορίας (κατά του παγετού).
Εφαρμογή:
premium αστάρωμα, σφράγιση και βιομηχανική επίστρωση
Ιξώδες:
≤1100mPa·S
Τιμή Ph:
7,0-9,0
MFT:
60℃
TG:
63℃
Συσκευασία λεπτομέρειες:
Πλαστικό τύμπανο
Περιγραφή του προϊόντος
Alkali-Resistant Acrylic Emulsion for Sealing Primers | High Tg Concrete Sealer Resin
Product Description

WL-J400 is an advanced, fine-particle-size acrylate copolymer emulsion designed for premium priming, sealing, and industrial coating applications. Engineered with an ultra-high glass transition temperature (Tg:59-65℃) and superior crosslinking density, this resin provides an unbreakable anchoring profile on challenging concrete, masonry, and plastic substrates. It thoroughly solves common industry failures, such as poor bonding in elastomeric coatings and topcoat degradation caused by highly alkaline substrates.

WL-J400 is specifically designed for exterior wall primer latex paints. In sealing primer formulations, it demonstrates exceptional water resistance, alkali resistance, and anti-efflorescence (anti-frosting) properties. Compared with international benchmarks of the same class, its performance has reached a leading global standard.

Physical Property
Property Value Unit
Appearance Milky white liquid ---
Solid content 39-43 %
Viscosity(25℃Spindle 3#, 60 rpm) ≤1100 mPa·S
pH value 7.0-9.0 ---
MFT 58-65
Tg 59-66
Performance
  • Alkali resistance: No blistering or peeling after immersion in 10% NaOH solution for 72 hours.
  • Adhesion: Adhesion to concrete substrate meets ISO 2409 Class 0; no detachment at the edges of the cross-cut.
  • Breathability: Water vapor transmission rate ≥1500 g/(㎡·24h); suitable for damp substrates.
Recommended Applications
  • High-End Concrete Sealers & Brick Glazes
  • Exterior Anti-Alkali Wall Primers
  • Industrial Plastic Coatings
  • Clear Coats for Masonry Surfaces & General Industrial Finishes

SE9158 High-Performance Water-Based Acrylic Resin product sample

Technical Note: This material is formulated according to our existing technology and experience. The technical advice provided is sincere, but it is not guaranteed to be suitable for all samples and formulations. All data are for reference purposes only.